TopUSAJobs.com
This listing was posted on TopUSAJobs.
GENERAL ENGINEER (CYBER) with Security Clearance
Location:
Philadelphia, PA
Description:
Duties--- You will develop and maintain machinery controls for electrical and mechanical systems and provide technical advice on controls systems deployed in support of Operational Test and Evaluation (T+E) and policy.--- You will conceive, conduct and direct an overall strategy for project/program to advance the state of the art technology as it applies of the NSWCPD mission areas.--- You will apply advanced engineering knowledge to anticipate effect of probable technological changes on the programs/projects/major systems.--- You will display expert knowledge of machinery controls and electrical/mechanical systems engineering practices and principles.--- You will be responsible for the establishment of program goals and objectives.--- You will assign, direct, and review the efforts of all engineering resources and support personnel.--- You will be responsible for managing the CTF efforts ensuring execution within budget and on schedule to support the mission and goals of the program.--- You will establish liaison and close coordination with Navy organizations, and private industry.--- You will display expert knowledge of machinery control applications using Programmable Logic Controllers, Human Machine Interface display screens, sensor feedback loops, and protective featuresRequirements Conditions of Employment--- Must be a US Citizen.--- Must be determined suitable for federal employment.--- Must participate in the direct deposit pay program.--- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov--- Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade levelThis requirement is called time-in-gradeTime-in-grade requirements must be met by the closing date of this announcement.--- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.--- Males born after 12-31-59 must be registered for Selective Service.--- This is a bargaining unit position.--- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.--- This position is designated as a Cyber IT/Cybersecurity Workforce positionYou must obtain and maintain the credentials as described in SECNAV M-5239.2 for specialty area 621 level Advanced within 12 months of appointment.--- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sitesYou must be able to travel on military and commercial aircraft for extended periods of timeQualifications Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-13 grade level or pay band in the Federal service or equivalent experience in the private or public sectorSpecialized experience must demonstrate the following: As a professional engineer, strategically manage advanced machinery controls and electrical systems programs, leveraging expert knowledge with innovative problem-solving skills to enhance operational effectivenessOther examples of experience: (1)Use of Risk Management tools per NAVSEA 5000.8; (2)Qualified at LOTO requester/Peer reviewer iaw Compatibility Test Facility (CTF) Standard Operating Procedure(SOP); (3)System level Job Qualification Requirements(JQR) qualified or similar qualifiction for atleast 1 facility sytem at expert and journey level with ateast one year of experience supproting controls sysems engineering; (4)Strong Leadership skills and experience in briefing technical stakeholders; (5)Experience with design of systems and review of drawings to produce equipmwnt installation drawings in accordance with specified interface control documents; (6)Experience is developing work products to verify & validate work has been performed to a standard that will stand up to technical rigor of a Ceritfication Audit; (7)Familiar with self assessment processes and Audit & Surveillance techniques; (8)Experience in developing and executing a budget, including supporting contracting, acquisitions, maintenance, and sparing strategiesAdditional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degreeTo be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the positionOR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.htmlOR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positionsAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsFederal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applican
Company:
Department Of Defense
Posted:
April 24 on TopUSAJobs
Visit Our Partner Website
This listing was posted on another website. Click here to open: Go to TopUSAJobs
Important Safety Tips
- Always meet the employer in person.
- Avoid sharing sensitive personal and financial information.
- Avoid employment offers that require a deposit or investment.
To learn more, visit the Safety Center or click here to report this listing.
More About this Listing: GENERAL ENGINEER (CYBER) with Security Clearance
GENERAL ENGINEER (CYBER) with Security Clearance is a Engineering General Engineer Job at Department of Defense located in Philadelphia PA. Find other listings like GENERAL ENGINEER (CYBER) with Security Clearance by searching Oodle for Engineering General Engineer Jobs.
GENERAL ENGINEER (CYBER) with Security Clearance is a Engineering General Engineer Job at Department of Defense located in Philadelphia PA. Find other listings like GENERAL ENGINEER (CYBER) with Security Clearance by searching Oodle for Engineering General Engineer Jobs.